| Copper Ports |
10 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP Fiber Ports |
2 x 100/1000BASE-X SFP interfaces (Port-11 and Port-12) |
|
2 x 100/1000/2500BASE-X SFP interfaces (Port-13 and Port-14) |
| PoE Injector Ports |
8 ports with 802.3at/af PoE injector function (Port-1 to Port-8) |
| Console |
1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| RAM |
128MBytes |
| Flash Memory |
64MBytes |
| Reset Button |
< 5 sec: System reboot |
|
> 5 sec: Factory default |
| ESD Protection |
6KV DC |
| Enclosure |
IP30 aluminum case |
| Installation |
DIN-rail kit and wall-mount kit |
| Connector |
Removable 6-pin terminal block for power input |
|
Removable 6-pin terminal block for DI/DO interface |
| Alarm |
One relay output for power failure (Alarm relay current carry ability: 1A @ 24V DC) |
| Digital Input |
2 digital input (DI) |
| Digital Output |
2 digital output (DO) |
| Dimensions (W x D x H) |
76.8 x 107.3 x 152 mm |
| Weight |
1144g |
| Power Requirements |
Dual 48~54V DC (>51V DC for PoE+ output recommended) |
| Power Consumption |
Max. 6.48 watts/22 BTU (Power on without any connection) |
|
Max. 261W/890 BTU (Full Loading) |
| LED Indicator |
System: |
|
– Power 1 (Green) |
|
– Power 2 (Green) |
|
– Alarm (Red) |
|
– Ring (Green) |
|
– Ring Owner (Green) |
|
– DIDO (Red) |
|
Per 10/100/1000T RJ45 PoE+ Ports: |
|
– PoE-in-Use (Amber) |
|
– LNK/ACT (Green) |
|
Per 10/100/1000T RJ45 Ports: |
|
– 1000 LNK/ACT (Green) |
|
– 100 LNK/ACT (Amber) |
|
Per SFP Interface: |
|
– 100 LNK/ACT (Amber) |
|
– 1G/2.5G LNK/ACT (Green) |
| Switching |
Store-and-Forward |
| Switch Fabric |
34Gbps/non-blocking |
| Throughput (pps) |
25.30Mpps @ 64 bytes packet |
| Address Table |
8K entries, automatic source address learning and aging |
| Shared Data Buffer |
4Mbits |
| Flow Control |
IEEE 802.3x pause frame for full duplex |
|
Back pressure for half duplex |
| Jumbo Frame |
9Kbytes |
| Power Over Ethernet |
IEEE 802.3at Power over Ethernet Plus/PSE |
|
Backward compatible with 802.3af Power over Ethernet |
| PoE Power Supply Type |
End-span |
| PoE Power Output |
IEEE 802.3af Standard: Per port 48V~51V DC, max. 15.4 watts |
|
IEEE 802.3at Standard: Per port 52V~54V DC, max. 36 watts |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
48V Power input: 125W maximum (depending on power input) |
|
52~54V Power input: 240W maximum (depending on power input) |
| Max. Number of PDs |
Class 2: 8 |
|
Class 3: 8 |
|
Class 4: 8 |
| PoE Management Functions |
Active PoE device alive detection |
|
PoE Power Recycling |
|
PoE Schedule |
|
PoE Extend Mode |
|
PoE System Management |
| Layer 3 Functions |
IP Interfaces: Max. 8 VLAN interfaces |
|
Routing Table: Max. 32 routing entries |
|
Routing Protocols: IPv4/IPv6 software static routing |
| Layer 2 Functions |
Port Configuration |
|
Port Status |
|
Port Mirroring |
|
VLAN |
|
Link Aggregation |
|
Spanning Tree Protocol |
|
IGMP Snooping |
|
MLD Snooping |
|
Bandwidth Control |
| RING |
Supports ERPS |
| Synchronization |
IEEE 1588v2 PTP (Precision Time Protocol) |
| QoS |
Traffic classification, strict priority and WRR |
|
8-level priority for switching |
| Security Functions |
Access Control List |
|
Port Security |
|
IP source guard |
|
Dynamic ARP inspection |
|
Command line authority control based on user level |
| AAA |
RADIUS client |
|
TACACS+ client |
| Network Access Control |
IEEE 802.1x port-based network access control |
|
MAC-based authentication |
|
Local/RADIUS authentication |
| Switch Management |
Basic Management Interfaces: Console; Telnet; Web browser; SNMP v1, v2c |
|
Secure Management Interfaces: SSHv2, TLS v1.2, SNMPv3 |
|
System Management: Firmware upgrade by HTTP protocol; Configuration upload/download through HTTP; Remote syslog; NTP |
| Event Management |
Remote syslog; Local system log; SMTP |
| ONVIF |
ONVIF device discovery; ONVIF device monitoring |
| SNMP MIBs |
RFC1213 MIB-II; RFC 2863 IF-MIB; RFC1493 Bridge MIB; RFC1643 Ethernet MIB; RFC2863 Interface MIB; RFC2665 Ether-Like MIB; RFC2737 Entity MIB; RFC2819 RMON MIB; RFC2618 RADIUS Client MIB; RFC3411 SNMP-Frameworks-MIB; IEEE802.1X PAE; LLDP; MAU-MIB; Power over Ethernet MIB |
| Standards Conformance |
Regulatory Compliance: FCC Part 15 Class A, CE |
|
Stability Testing: IEC60068-2-32 (free fall), IEC60068-2-27 (shock), IEC60068-2-6 (vibration) |
|
Standards Compliance: IEEE 802.3, IEEE 802.1, ITU-T G.8032, RFCs related to networking protocols |
| Environment |
Operating Temperature: -40 ~ 75 degrees C |
|
Storage Temperature: -40 ~ 85 degrees C |
|
Humidity: 5 ~ 95% (non-condensing) |
| Ordering Information |
IGS-5225-8P2T4S |
| Accessories |
PWR-480-48 |
giới thiệu 
tin tức
liên hệ
khuyến mại
Ms.Dung - 0982 960 685
