| Hardware Specifications |
|
| Version |
4 |
| Copper Ports |
18 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots |
2 x 1000/2500BASE-X SFP interfaces (Port-19 and Port-20), compatible with 100BASE-FX SFP |
| PoE Injector Port |
16 ports with 802.3at/af PoE injector function (Port-1 to Port-16) |
| Console |
1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| Reset Button |
< 5 sec: System reboot<br> > 5 sec: Factory default |
| ESD Protection |
6KV DC |
| Enclosure |
IP30 aluminum case |
| Installation |
DIN-rail kit and wall-mount kit |
| Connector |
Removable 6-pin terminal block for power input (Power 1, Fault alarm, Power 2)<br> Removable 6-pin terminal block for DI/DO interface (DI 1 & 2, DO 1 & 2, GND) |
| Alarm |
One relay output for power failure, 1A @ 24V DC |
| DI, DO |
2 digital input (DI): Level 0: -24V2.1V, Level 1: 2.1V24V<br> 2 digital output (DO): Open collector to 24V DC, 100mA max. |
| Dimensions (W x D x H) |
86 x 107 x 152 mm |
| Weight |
1548g |
| Power Requirements |
Dual 48~54V DC (>51V DC for PoE+ output recommended) |
| Power Consumption |
Max. 18.8 watts/64BTU (Power on without any connection)<br> Max. 413 watts/1409BTU (Full loading with PoE function) |
| LED Indicator |
System: Power 1 (Green), Power 2 (Green), Fault Alarm (Red), Ring (Green), Ring Owner (Green), DIDO (Red)<br> Per RJ45 PoE+ Ports: PoE-in-Use (Amber), LNK/ACT (Green) |
| Switching |
|
| Switch Architecture |
Store-and-Forward |
| Switch Fabric |
46Gbps/non-blocking |
| Throughput (packet per second) |
34.2Mpps @ 64 bytes packet |
| Address Table |
32K entries, automatic source address learning and aging |
| Shared Data Buffer |
32Mbits |
| Flow Control |
IEEE 802.3x pause frame for full duplex, Back pressure for half duplex |
| Jumbo Frame |
10K bytes |
| Power Over Ethernet |
|
| PoE Standard |
IEEE 802.3at/af Power over Ethernet Plus/PSE |
| PoE Power Output |
IEEE 802.3af Standard: Per port 48V51V DC, max. 15.4 watts<br> IEEE 802.3at Standard: Per port 51V54V DC, max. 36 watts |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
48V Power input: 240W maximum<br> 52~54V Power input: Single power input: 240W maximum, Dual power input: 360W maximum |
| Layer 3 Functions |
|
| IP Interfaces |
Max. 128 VLAN interfaces |
| Routing Table |
Max. 128 routing entries, Max. 4K H/W routing table entries |
| Routing Protocols |
IPv4 RIPv1/v2, IPv4 OSPFv2, IPv4 hardware static routing, IPv6 OSPFv3, hardware static routingIPv4 OSPFv2 dynamic routing |
| Layer 2 Function |
|
| Port Configuration |
Port disable/enable, Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Power saving mode control |
| Port Status |
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
| Port Mirroring |
TX / RX / Both, Many-to-1 monitor, RMirror – Remote Switched Port Analyzer (Cisco RSPAN), Supports up to 5 sessions |
| VLAN |
IEEE 802.1Q tag-based VLAN, IEEE Q-in-Q tunneling, Private VLAN Edge (PVE), MAC-based VLAN, Protocol-based VLAN, VLAN Translation, Voice VLAN, MVR, GVRP |
| Link Aggregation |
IEEE 802.3ad LACP/static trunk, Supports 10 trunk groups with 16 ports per trunk group |
| Spanning Tree Protocol |
IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, Supports 7 MSTP instances |
| IGMP Snooping |
IPv4 IGMP (v1/v2/v3) snooping, IPv4 IGMP querier mode support, Up to 255 multicast groups |
| MLD Snooping |
IPv6 MLD (v1/v2) snooping, IPv6 MLD querier mode support, Up to 255 multicast groups |
| Bandwidth Control |
Per port bandwidth control: Ingress: 500Kb1000Mbps, Egress: 500Kb1000Mbps |
| Ring |
Supports ERPS, and complies with ITU-T G.8032, Recovery time < 10ms @ 3 nodes, Recovery time < 50ms @ 16 nodes, Supports Major ring and sub-ring |
| Synchronization |
IEEE 1588v2 PTP (Precision Time Protocol), Peer-to-peer transparent clock, End-to-end transparent clock |
| QoS |
Traffic classification based, strict priority and WRR, 8-level priority for switching, Port number, 802.1p priority, 802.1Q VLAN tag, DSCP/TOS field in IP packet |
| Security Functions |
|
| Access Control List |
IP-based ACL/MAC-based ACL, ACL based on: MAC Address, IP Address, Ethertype, Protocol Type, VLAN ID, DSCP, 802.1p Priority, Up to 256 entries |
| Security |
Port Security, IP source guard (up to 512 entries), Dynamic ARP inspection (up to 1K entries), Command line authority control based on user level, Static MAC address (up to 64 entries) |
| AAA |
RADIUS client, TACACS+ client |
| Network Access Control |
IEEE 802.1x port-based network access control, MAC-based authentication, Local/RADIUS authentication |
| Switch Management |
|
| Basic Management Interfaces |
Console, Telnet, Web browser, SNMP v1, v2c |
| Secure Management Interfaces |
SSHv2, TLS v1.2, SNMP v3 |
| System Management |
Firmware upgrade by HTTP protocol through Ethernet network, Configuration upload/download through HTTP, Remote syslog, System log, LLDP protocol, NTP, PLANET Smart Discovery Utility, PLANET NMS system, PLANETCloudViewer/CloudViewerPro, Event Management (Remote syslog, Local system log, SMTP), ONVIF (ONVIF device discovery, ONVIF device monitoring, Floor Map), SNMP MIBs (RFC 1213 MIB-II, RFC 2863 IF-MIB, RFC 1493 Bridge MIB, RFC 1643 Ethernet MIB, RFC 2863 Interface MIB, RFC 2665 Ether-Like MIB, RFC 2737 Entity MIB, RFC 2819 RMON MIB (Groups 1, 2, 3 and 9), RFC 2618 RADIUS Client MIB, RFC 3411 SNMP-Frameworks-MIB, RFC 4292 IP Forward MIB, RFC 4293 IP MIB, RFC 4836 MAU-MIB, IEEE 802.1X PAE, LLDP, Power over Ethernet MIB) |
| Standards Conformance |
|
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC60068-2-32 (free fall), IEC60068-2-27 (shock), IEC60068-2-6 (vibration) |
| Standards Compliance |
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3z Gigabit SX/LX, IEEE 802.3ab Gigabit 1000T, IEEE 802.3x flow control and back pressure, IEEE 802.3ad port trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, IEEE 802.1Q VLAN tagging, IEEE 802.1ad Q-in-Q VLAN stacking, IEEE 802.1X Port Authentication Network Control, IEEE 802.1ab LLDP, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3ah OAM, IEEE 802.1ag Connectivity Fault Management (CFM), IEEE 1588 PTPv2, RFC 768 UDP, RFC 783 TFTP, RFC 791 IP, RFC 792 ICMP, RFC 2068 HTTP, RFC 1058 RIP v1, RFC 2453 RIP v2, RFC 1112 IGMP v1, RFC 2236 IGMP v2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, RFC 3810 MLD version 2, RFC 2328 OSPF v2, RFC 2740 OSPF v3, ITU G.8032 ERPS Ring, ITU-T Y.1731 Performance Monitoring |
| Environment |
|
| Operating Temperature |
-40 ~ 75 degrees C |
| Storage Temperature |
-40 ~ 85 degrees C |
| Humidity |
5 ~ 95% (non-condensing) |
| Ordering Information |
IGS-20160HPT Industrial L3 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch |
| Accessories |
PWR-480-48 48V, 480W Din-rail Power Supply (NDR-480-48, adjustable 48-56V DC Output) |
giới thiệu 
tin tức
liên hệ
khuyến mại
Ms.Dung - 0982 960 685
